7-in-1 pool set
- An extended set of pool chemicals for comprehensive water protection in garden pools.
The kit includes:
- Extra Chlor 1 kg - shock disinfection
- Chlorox Multitablets 20 g - 1 kg - continuous disinfection
- Balancer pH minus 1.5 kg - granules
- Balancer pH plus 1 kg - granules
- Algofix 1kg - combating algae
- Photometric meter pH/Cl - water analysis
- FlockStop - coagulation/flocculation
Included in the kit are:
- dosing scoop
- protective gloves
- Pool ABCs
EXTRA CHLOR – granules
Preparation in the form of granules intended for combating algae, bacteria and fungi in swimming pools and for disinfecting surfaces in contact with food, non-contact with food and in veterinary hygiene
How to use: Check the pH of the water. It should be 7.0 - 7.4. For a different value, use a pH corrector. Extra Chlor is best used after dissolving in water. Then pour into the pool near the water supply. The preparation is used in the amount of 4 - 6 g/m3/24h when filling the pool, and then 2 - 3 g/m3/24h. The total dose of active chlorine should not exceed 0.5mg/dm3 of swimming pool water at the time of its use by people, in accordance with the Regulation of the Minister of Health on the quality of water intended for human consumption (Journal of Laws of 2007, No. 61, item 417, as amended). If the content of active chlorine exceeds 0.5 mg/dm3 the swimming pool should not be used. Lower the chlorine dose and wait until this value falls within the designated range. You can also lower the active chlorine content with a chlorine deactivator. The content of active chlorine in the pool water and the pH value should be checked regularly using appropriate tests for measuring these parameters. The preparation can also be used to disinfect surfaces - most often 0.5-1.0% solutions (5-10 g / l of water) are used. After disinfecting food contact surfaces, rinse them with potable water. It is best to dosing in the evening, when there are no people in the pool. Use after dissolving in water.
CHLOROX MULTITABLETS 20 g
Chlorine tablets with bactericidal effect for water disinfection in swimming pools.
The tablets contain ingredients for full conditioning of swimming pool water.
How to use: Put the right amount of tablets in a float or skimmer and turn on the circulation pump. This operation should be repeated once every 5-7 days. To ensure proper effectiveness of the product, it is recommended to regularly check the content of active chlorine in the pool water and the pH using appropriate testers or devices. Disinfection should be carried out in the evening. The pool can be used the next day. After the disinfection process, the concentration of active chlorine in the water should comply with the permissible values set out in the Regulation of the Minister of Health on the requirements that water in swimming pools should meet.
BALANCER pH minus granules - pH correction of swimming pool water
How to use: The preparation is used to lower the pH value of water from alkaline reaction to the ideal range (pH = 7.0 - 7.4). 1.5 kg pH Balancer minus granules allows you to lower the pH value by about 0.2 in 100 m3 of pool water. The required amount of the product should be dissolved in water and dosed into the circulation in several doses. Water hardness affects product performance. With hard water, the amount of detergent needed may increase, with soft water it may decrease.
BALANCER pH plus granulate - pH correction of swimming pool water
How to use: The preparation is used to increase the pH value of water from acid reaction to the ideal range (pH = 7.0 - 7.4). 1 kg of pH Balancer + granules allows you to raise the pH value by about 0.2 in 100 m3 of pool water. The required amount of the product should be dissolved in water and dosed into the circulation in several doses. Water hardness affects product performance. With hard water, the amount of detergent needed may increase, with soft water it may decrease.
ALGOFIX - combating algae
Non-foaming liquid preparation with bactericidal, yeasticidal and algaecidal properties, intended for water disinfection in swimming pools, fountains and ponds (without stock). Effective against bacteria: Pseudomonas aeruginosa (blue bacillus), Escherichia coli (colon bacillus), Staphylococcus aureus (golden staphylococcus), enterococcus hirae (fecal streptococcus).
How to use: The product is intended for disinfection, removal and prevention of algae growth in both indoor and outdoor swimming pools. Dose ALGOFIX directly into the pool in the evening, after bathing, or using automatic dosing systems.
Recommended doses: The product has a bactericidal and yeasticidal effect at a concentration of 0.008% (80g/1m3 of water), an algaecidal effect at a concentration of 0.005% (50g/1m3 of water) during 72 hours of contact. When the pool water tends to become cloudy, increase the dosage of the preparation by 50%. In case of a large number of bathers, heavy rainfall or high temperatures
ur need to double the dose.
Avoid contact with the eyes, inhalation of product vapors and prolonged or repeated contact with the skin.
240 g/kg N-methylmethanamine polymer (EINECS 204-697-4) with (chloromethyl)oxirane (EINECS 203-439-8)/polymeric quaternary ammonium chloride.
FlockStop - coagulation of pool water
Usage: A fast-acting agent that improves filtration efficiency. It works optimally at a pH of 4.5-9. Water temperature and current treatment methods do not affect the effectiveness of the preparation, the best effect of which is achieved with continuous dosing. FlockStop supports the agglomeration of small turbidity particles into larger ones, which are then retained on the filter bed. The product can be applied directly from the delivery container using a dosing pump, or manually. The product can be diluted in a ratio of 1:10 (for high capacity pumps) When using FlockStop continuously, the dosage should be set in the range of 0.5 - 1.5g per m3 Manual dosing:
In order to enhance the effect of Flockstop, first adjust the pH value of the pool water between 7.0-7.4 using pH Balancer pH minus or pH Balancer plus in liquid or granular form. Then add Flockstop directly to the pool water in the amount of 20 to 100 ml of concentrate per 10m³ of water, depending on the degree of its turbidity with an efficient filtration system. In the event of a heavy pool load, the dose can be doubled. depending on the pool load.
